SKYSCAN CMOS Edition 1272
Get the sample clear 3 d view
Bright spot
Bright spot
SKYSCAN CMOS - 1272 high resolution XRM
SKYSCAN 1272 CMOS version based on trusted SKYSCAN 1272 desktop X-ray microscope platform, and combines the latest X-ray technology, XRM will ascend to a new level.
The most advanced 16 million pixels CMOS X-ray detector can provide excellent resolution and high contrast image.Enlarged vision probe and enhanced X-ray sensitivity can be shorten scan time two times.
drug
Porous media
Building materials
Electronic components/devices
Geological/petrochemical
Fiber/composite materials
The characteristics of
The main features
Genius mode
SKYSCAN 1272 CMOS with Genius patterns can be automatically selected parameters.Just click once, then automatically optimize power, energy, filtering, exposure time and background correction.
Moreover, the large size can make samples and CMOS detector as much as possible close to the light source, it can significantly increase the measured signal intensity.It is for this reason, 1272 CMOS SKYSCAN scanning speed than the conventional system detector position fixed up to five times faster.
Automatic sampler
SKYSCAN 1272 CMOS can choose to cooperate with a 16 position of external automatic sampler, to quality control and routine analysis in order to increase processing speed.
Automatic sampler can accommodate different sizes of samples, the samples up to 25 mm in diameter.
Can easily switch samples at any time, not break the ongoing scanning process.System can automatically detect the new sample, the LED can display each scanning state: preparation, scanning and complete.
In situ test rig
Brooke's material test bench can be maximum compression test of 4400 N and 440 N tensile test.All test bench can be contacted automatically by the system of the turntable, without any external cables.Through the use of software provided, can set the scheduled scan test.
Brooke's heating and cooling units can reach the highest + 80 DHS C or below the lowest environment temperature low temperature of 30 DHS C.and其它的试验台一样，加热和冷却台也不需要任何额外的连接，系统可以自动地识别不同的试验台。通过使用加热台和冷却台，可在非环境条件下检测样品，从而评估温度对样品微观结构的影响。
SKYSCAN 1272 CMOS
No external cooling water, or special power supply, performance is not affected, designed to meet the demand of today's ecological and economic
SKYSCAN 1272 CMOS
Intelligent solutions and design, such as the integrated vibration isolator, form a perfect whole
application
The key application
Fiber and composite materials
By putting the materials synthesis of composite materials, components can be obtained with higher strength, at the same time significantly reducing weight.To further optimize the component performance, you must ensure that the direction of the composition can be optimized.Fiber is one of the most commonly used components, in reinforced concrete, glass fiber in electronic components, materials and aviation carbon nanotubes.XRM can be used for detecting fiber and composite material, and the need for crosscutting, to ensure that the sample status will not be affected in the process of preparation of samples.
- The direction of the embedded objects
- Layer thickness, fiber size and spacing of quantitative analysis
- Using in situ sample, test temperature and physical properties
drug
The process of new drug development is a time-consuming and expensive., XRM can provide products in the product formula stage instant internal structure, speed up the new drug.
- Determine the compaction density of tablet
- Measurement of coating thickness uniformity
- Assessment of distribution of the API
- Detection by compaction tablet in the micro cracks caused by stress
- Using in situ compression testing mechanical properties
foam
Foam materials have wide application in industry.Based on the characteristics of the material and structure of the foam can be used for heat insulation and sound insulation materials, can also be used as a protection or filtering device of damping structure...
XRM are nondestructive to realize 3 d visualization of bubble internal structure.
- Determine the thickness of the local structure
- To determine the structure in order to realize the gap between the visualization of the network
- Through the compression and tensile mechanical test in situ
- Determine the opening porosity and obturator porosity
Examples of application
electronic
geological
wood
food
The porous structure
Technical parameters
SKYSCAN 1272 CMOS technology parameters
The characteristics of |
parameter |
advantage |
X-ray source |
40-100 kV 10 W. < 5 m (including size, 4 W |
Maintenance free, fully sealed X-ray source Quality control was achieved by rapid scanning, or 4 d XRM |
X-ray detector |
16 MP sCMOS detector (4096 x 4096 pixels) | Precision of the detector can achieve the highest resolution |
The sample size |
The biggest diameter of 75 mm Maximum height of 70 mm |
Suitable for small to medium size samples |
Automatic sampler (optional) |
16 kinds of sample, up to 25 mm in diameter The outer |
Unattended, high flux The size of the sample random combination Add/remove samples at any time, don't interrupt the scanning process |
size |
1160 mm x 520 mm x 330 mm (deep x width x height) Weight 150 kg |
Save a space, suitable for every lab desktop system |
The power supply |
100-240 - v AC, 50 to 60 hz, the biggest 3 a | Minimum standard installation requirements, the power supply can meet the requirements |
software
Orientation, scanning, reconstruction and analysis
Brooke XRM solution contains all the software needed to collect and analyze data.Intuitive graphical user interface combined with the user guide of parameter optimization, suitable for both professional users and is suitable for novice users.By using the latest GPU acceleration algorithm, reconstruction time is greatly shortened.CTVOX,CTANandCTVOL相结合，形成一个强大的软件套件，支持对模型进行定性和定量分析。
Measuring software:
SKYSCAN 1272, instrument control, measure planning and collection
Reconstruction of software:
NRECON - 2 d figure projection drawing into a 3 d volume
Analysis software:
DATAVIEWER- check the 3 d volume step by step, 2 d / 3 d image registration
CTVOX-- by volume rendering shows a real situation
CTAN- 2 d / 3 d image analysis and processing
CTVOL- surface model visualization, can be exported to a CAD or 3 d printing
webinar
For more information
SKYSCAN 1272 resources
Brochure and catalogue
video
support
Service and support
- Using the network and the advanced remote service tools, to provide hardware, software and application supportThe service platform
- LabScapeMaintenance services agreement
- Live, on-demand support
- Installation and operation, and performance verification
- Site planning, relocation and consultation
- Replacement parts and spare parts,consumablesAs well asThe sceneandOnline training
- Software updates and manuals and LabScape MSA management (brukersupport.com)
