SKYSCAN 1273
A desktop system can meet all requirements
Bright spot
Bright spot
SKYSCAN XRM 1273 - high capacity
SKYSCAN 1273 set a new standard for nondestructive testing of desktop devices, it implements the previously only be achieved through the console system performance.It can detect for up to 500 mm, 300 mm in diameter and weighs 20 kg of sample.
Combined with higher power of high energy X-ray source with high sensitivity and reading speed of big size flat-panel detector, it only needs a few seconds, can obtain high quality images.
SKYSCAN 1273 with 3 d software SUITE.This comprehensive package covers the GPU accelerated reconstruction, 2 d / 3 d shape analysis, as well as surface and volume rendering visualization.
Add material manufacture
Medical apparatus and instruments
Energy storage/battery
Geological/petrochemical
Building materials
Electronic components/devices
The characteristics of
The main features
High capacity desktop system
SKYSCAN samples of big sample room can accommodate 1273, than through a single detector taking place can scan range.By sectional scanning and detector bias scan, SKYSCAN 1273 to scan up to 250 mm diameter and length of 250 mm of large objects.3 d. SUITE can be automatically and the large size image stitching together seamlessly.
The latest detector technology
SKYSCAN 1273 equipped with 6 MP based on the latest large flat-panel detector, with greater dynamic range, higher contrast.Fast frame rate plus special optimization scintillator, it can in less than 15 seconds over a short period of time to obtain high quality images, it is very suitable for time-resolved three-dimensional X-ray microscopic imaging.
In situ test rig
Brooke's material test bench can be maximum compression test of 4400 N and 440 N tensile test.All test bench can be contacted automatically by the system of the turntable, without any external cables.Through the use of software provided, can set the scheduled scan test.
Brooke's heating and cooling units can reach the highest + 80 DHS C or below the lowest environment temperature low temperature of 30 DHS C.and其它的试验台一样，加热和冷却台也不需要任何额外的连接，系统可以自动地识别不同的试验台。通过使用加热台和冷却台，可在非环境条件下检测样品，从而评估温度对样品微观结构的影响。
SKYSCAN 1273
Spiral scanning
HART, Plus
application
The key application
Add material manufacture
Increase material manufacture is usually referred to as "3 d printing", can be used to produce parts with complex internal and external structure.and需要特殊模具或工具的传统技术不同，增材制造既能用于经济地生产单件产品原型，也能生产大批量的部件。生产完成后，为了确保生产出的部件性能符合预期，需要验证内部和外部结构。XRM能以无损的方式完成这种检测，确保生产出的部件符合或超出规定的性能。
- Check the internal space formed by the residual powder
- Verify the internal and external dimensions
- As compared with CAD model directly
- Analysis consists of a single material and a variety of material components
Medical equipment and pharmaceutical packaging
Packaging design and testing to ensure that drugs able to correct and safe way to patients is very important.XRM to rapid detection of lossless and aseptic conditions to realize the quality control, ensure the production process and produce a product can meet the requirements.
- High-throughput scanning of medical apparatus and instruments, in order to realize the quality control
- Check the maximum size of up to 20 cm x 20 cm x 20 cm pharmaceutical packaging integrity
- Monitor and control the internal quality and consistency of metal and plastic components
- Measure the internal and external dimensions, and fault detection
geological
XRM to different geological materials (from small mineral samples to full size large core) for nondestructive testing.
- Quantitative analysis of granularity, open/closed structure parameters such as porosity and connectivity
- Calculate the 3 d distribution of mineral phases
- By in situ mechanics experiment, the structure and mechanical properties of samples
- Fluid flow in porous media, dissolution and crystallization process of visualization
Application library
Technical parameters
SKYSCAN 1273 technical parameters
| function |
specifications | advantage |
| X-ray source |
40-130 kV 39 W |
Maintenance free, fully sealed X-ray source Quality control was achieved by rapid scanning, or 4 d XRM |
| X-ray detector |
CMOS active pixel flat-panel detector 6 MP (3072 x 1944) |
Good signal-to-noise ratio Large field of view |
| The sample size | A diameter of 250 mm |
Can use desktop instrument scanning large samples |
| size | 1250 mm x 815 mm x 820 mm (deep x width x height) |
Save a space, suitable for every lab desktop system |
| The power supply |
100-240 VAC, 50 to 60 Hz, the biggest 3 A |
Minimum standard installation requirements, the power supply can meet the requirements |
software
Orientation, scanning, reconstruction and analysis
Brooke XRM solution contains all the software needed to collect and analyze data.Intuitive graphical user interface combined with the user guide of parameter optimization, suitable for both professional users and is suitable for novice users.By using the latest GPU acceleration algorithm, reconstruction time is greatly shortened.CTVOX,CTANandCTVOL相结合，形成一个强大的软件套件，支持对模型进行定性和定量分析。
Measuring software:
SKYSCAN 1273, instrument control, measure planning and collection
Reconstruction of software:
NRECON - 2 d figure projection drawing into a 3 d volume
Analysis software:
DATAVIEWER- check the 3 d volume step by step, 2 d / 3 d image registration
CTVOX-- by volume rendering shows a real situation
CTAN- 2 d / 3 d image analysis and processing
CTVOL- surface model visualization, can be exported to a CAD or 3 d printing
webinar
For more information
support
Service and support
- Using the network and the advanced remote service tools, to provide hardware, software and application supportThe service platform
- LabScapeMaintenance services agreement
- Live, on-demand support
- Installation and operation, and performance verification
- Site planning, relocation and consultation
- Replacement parts and spare parts,consumablesAs well asThe sceneandOnline training
- Software updates and manuals and LabScape MSA management (brukersupport.com)
