X-ray diffraction (XRD)

The D8 ENDEAVOR

Process and quality is in our hands

Automatic X-ray diffractometer

Fast sample cycle

Bright spot

The sample of the flexible processing

66/72
The quantity of the industry standard
Walk - up operation (more than one sample frame) : suitable for all kinds of type and amount of material, can be in two large sample frame
online
Conveyor belt or automatic sample
Through the automatic sample preparation, measurement and data evaluation, you will be able to get the highest flux and consistency analysis
EasyLoad
The sample plate
Equipped with RFID sample plate is very easy for the preparation of the bulk samples or from compatible element analyzer for transfer and loading
Brooke to provide you with the sole, in view of the position accuracy, response, and the resolution of standard instrument
Brooke's unique calibration accuracy assurance

Watch the D8 ENDEAVOR video

A new generation of D8 ENDEAVOR is an advanced system of X-ray diffraction (XRD), can be used for process optimization and quality control of powder industry.

Any conditions for powder XRD

D8 ENDEAVOR - used for qualitative and quantitative phase analysis research, crystal structure and microstructure of XRD system

D8 ENDEAVOR operation is very simple, at the same time, with high measurement speed, low detection limit and fast sample cycle, very suitable for industry, academia, and multi-user operating in the field of study.As for the industrial process optimization and quality control, D8 ENDEAVOR can be connected to the automatic sample preparation system, without further operation can complete sample of operators, this in order to achieve the highest integrity, homogeneity and sample preparation and deliver quality provides the guarantee.

The analyzer can easily adapt to a variety of laboratory and environmental conditions

  • Version 1 kW ECO - to save energy, the single-phase power, without peripheral water cooling, reduce running cost
  • 3 kW version - to have the lowest detection limit and the quantitative limit or fastest measuring time requirements of users, its performance is very high
  • Harsh environment options - in high temperature, damp and dusty environment, which has the best reliability
  • The improved cooling and high altitude options - electrical safety, can be run at an altitude of 4000 m above (nn)

The D8 ENDEAVOR, available at any time, to be able to do anything.

advantage

The highest performance - at least operator workload

D8 ENDEAVOR not only 24/7 round-the-clock operation, but also by the most advanced brooke XRD technical support, it is vital for analysis to meet the highest requirements.

  • Dynamic beam optimization (DBO) - operators need to configure the instrument, through electric optical element, can make the beam path geometry, in the ideal way to adapt to a variety of materials required for measuring conditions.
  • LYNXEYE probe, the best data quality and the lowest quantitative limit.Has the energy resolution LYNXEYE XE - T detector, residual inhibition can provide unprecedented fluorescence and white light, high count rate and excellent angular resolution, and without secondary monochromator or primary decide K with a filter.
    • Sample processing by before running the analysis when unloading a sample, a sample under preloading, achieve rapid sample cycle.When new samples can be measured in automatic sampler, need not operation in the workers exposed to X ray radiation.

    Operators can also be the D8 ENDEAVOR in daily operation, is by no means XRD experts authoritarian

    • TouchControl and Loader, intuitive and easy to use, as much as possible to reduce operating personnel training.Only in the form of graphics, it will be assigned to Loader software analysis method according to the position of the sample.
    • Button template: by the laboratory manager or our experts to create;Integrates the complete workflow: load samples, change instrument Settings, perform measurement, automatic running data assessment and analysis of the last in ResultsManager display.

    application

    The analysis of customized solutions for you

    We provide the D8 ENDEAVOR turnkey version and can be used for cement, mining, pharmaceutical industry, aluminum and metal.

    Includes the following contents:

    • According to the specific requirements of these industries tailored instrument configuration,
    • Optimized version of the data collection and evaluation software package,
    • Introduced the application of training and support for industry.
    The application scope of D8 ENDEAVOR

    The cement industry

    XRD and TOPAS Rietveld analysis unifies, is the material of heat, bypass, cement kiln ash, clinker and cement for quantitative analysis of the most powerful technology.

    By combining with XRD method of cement package, a new D8 ENDEAVOR has become the ideal solution in the industry.

    It can be in the whole production process, the realization of direct phase analysis (from raw materials, intermediate products, such as heat and dust (REACH) to cement clinker and final).Analysis of a major bright spot is that it can through proprietary PONKCS method, to distinguish the Alite type polycrystalline M1 and M3 and quantitative analysis of amorphous phase.

    The application scope of D8 ENDEAVOR

    Mining industry

    Using the D8 ENDEAVOR mineral package powder XRD is qualitative and quantitative analysis of mineral of the most direct way.

    Quantitative analysis using the TOPAS can reliably analysis of complicated geological materials.

    In addition, you can also use cluster analysis technology, to quickly analyze large amounts of data similarity, and generate the exploration mapping.

    The application scope of D8 ENDEAVOR

    metals

    X-ray powder diffraction (XRD) is a common analysis methods of steel-making process control and quality control.

    Exactly understand FeO concentration, is the key to reducing greenhouse gas emissions in iron.

    FeO concentration can be directly according to the mineral concentration of chemical measurement and calculation.Due to these value can be quickly concluded, therefore, XRD became the titration of alternatives.

    The application scope of D8 ENDEAVOR

    The aluminum industry

    Control the production of aluminum is a critical and demanding of X ray diffraction (XRD) analysis task.The reasons are as follows:

    First of all, smelter conditions (XRD instrument is need in here).

    Second, the huge sample flux: need continuously to detect hundreds of smelting workshop.And D8 ENDEAVOR can help shorten the measurement time and the expansion analysis ability of innovative technology to deal with these challenges.

    The application scope of D8 ENDEAVOR

    Respirable silica

    D8 ENDEAVOR is especially suitable for monitoring very small amounts of free silicon dioxide, which is a cause of lung cancer and other serious health problems.

    To this, equipped with LYNXEYE XE - T detector D8 ENDEAVOR, which can realize the accuracy of the highest and the lowest detection limit.

    In order to perfect the silica solution, brooke provides applicable to different filter types of sample holder, and aims at DIFFRAC. DQUANT software provides a complete set method, the software meets the requirement of NIOSH 7500.

    Technical parameters

    The D8 ENDEAVOR specifications

    specifications

    advantage

    High voltage generator

    3 Kw version

    1 kW ECO version

    The fastest scanning time, the lowest detection limit and the quantitative limit

    Low power consumption, single phase power, without external for cold water

    The sample processing

    A diameter of 51.5 mm 66 samples (2 ', ') or a diameter of 40 mm (1.6 ' ') of 72 samples

    EasyLoad pallet can hold 20 samples of 2 inches in diameter

    Mechanical arm or conveyor belt loading

    Size in line with the industry standard, compatible with automated sample preparation and automation concept

    Manual sample loading: offline samples preparation

    Automatic instrument operation: no operator intervention

    The beam optics

    Dynamic beam optimization

    Instrument can adapt to the optimum measuring conditions, no need manual reconfiguration.Without professional knowledge

    Electric scattering screen

    Reduce the air scattering background, has realized the better peak back than, and improved the lod and loq of

    Button action

    Loader software and touch

    Just need to complete the least training, operational instruments

    The detector

    Is directly proportional to the Ca XRF counter:

    SSD160-2:

    LYNXEYE - 2:

    LYNXEYE XE - T:

    (*) detector guarantee:

    Used in aluminum production control elements of the channel

    With 160 channels of silicon strip detector

    Super fast 1 d detector (*)

    Super sensitive, 1 d energy dispersive detector (*)

    Absolute trouble-free, no dead band

    goniometer

    Is Theta

    Samples always stay level, not out in the process of measurement

    Unique and alignment to ensure that: in the entire measuring range, accuracy is superior to 0.01 ° 2 theta

    Through the attached certificates of corundum reference track

    security

    German type approval

    Comply with CE standard

    Conform to the operator the highest safety standards

    In line with the machinery directive (2006/42 / EC), electrical equipment directive (2014/35 / EU), the electromagnetic compatibility directive (2014/30 / EU)

    accessories

    The D8 ENDEAVOR sample holder

    Because can handle multiple sample size and type at the same time, so the D8 ENDEAVOR is minimal sample preparation.Used in the sample holder is installed between the rack and measure the position of fixture, automatically to test the height different rack.

    • Rack in accordance with industry standards: the diameter of 51.5 mm (2 ') or 40 mm (1.6 ")
    • Fine powder filling to match the sample weight diameter or depth of cavity in the samples
    • Can choose the rear part of the load to reduce the preferred orientation
    • Can be in the absence of background on the sample holder of the preparation of very small amount of powder
    • For filter, clay, solid samples and sensitive to the environment, can further select special support

    software

    Measurement and analysis software

    Complete function and the quality is not discounted DIFFRAC. The SUITE software package provides the most simple measuring method, as well as the most powerful, the most accurate analysis results.All products are accord with the requirement of 21 CFR Part11 (if necessary).DIFFRAC. SUITE measurement center, used for conventional data evaluation and cluster analysis of DIFFRAC. EVA and used to meet other COD database, always with the two industrial laboratories and 10 academic users license.At the same time there are other licenses are available.DIFFRAC. TOPAS主要用于复杂多相混合物的定量分析,DIFFRAC.DQUANT则可为行业提供基于规范的合规分析,因此精确度最高。

    In terms of industrial process control and quality control, D8 ENDEAVOR can be equipped with TOPAS BBQ, the quantitative analysis for automatic black box.In terms of building materials analysis, brooke provides turnkey package, which contains formulated by our cement application specialists of 10 kinds of existing methods.DIFFRAC. SUITE software available in file or database mode, it includes the RESULTS MANAGER, said for the sample report and more time sequence.

    webinar

    support

    Service and support

    We offer:

    • Professional senior technical personnel to do fault professional technical support, isolation and solve the problem of hardware and software
    • Network remote service, providing diagnosis and application support
    • Fusion reality support - virtual engineers in your side,video)
    • According to your request to schedule maintenance
    • Customer site maintenance, maintenance services
    • Spare parts delivery will be within one working day/the world needs a few working days to complete
    • Installation qualification and operational qualification/performance verification of compliance services
    • Site planning and relocation
    • Find nextA training course

    Check out ourSupport site:

    • Software updates
    • Product manuals and installation guide
    • Training video

    Need to register.