DIFFRAC. DQUANT

Bright spot

From the calibration to the quantitative analysis of the report

Whether for experienced laboratory administrator, or for operator responsible for performing routine work, new DQUANT is the most ideal tool.The working process of the software with predefined analysis can be used to set the following methods:

With the reference calibration
Drift correction
Module and logical sequence
Add a method
Suitable for membrane filter sample slot absorption (NIOSH) 7500
Ratio method

Although always calibration in the form of interaction, but after the completion of a measurement, the unknown sample can be done in a simplified graphical user interface evaluation, can also be used in console mode to evaluate fully automatic.

Download the specification table From the calibration to the quantitative analysis of the report

The characteristics of

Which has the function of the user guide calibration

DQUANT both intuitive graphical user interface and workflow guidance.Can use pre-configured drop-down data tree analysis of the different tasks.

Build and verify calibration curve in the user interface and the intensity of drift correction.Experienced users can also be interactive analysis of unknown samples.

By using concentration modules, can be customized to report the results obtained from the concentration of the calibration.

The analysis of the gain maximum flexibility, strength module can be used.Built-in formula editor convenient calculation strength of column values easily.So you can use any type of user defined intensity calibration, peak overlap correction or simple average strength, in order to reduce effect of preferred orientation.

The analysis of the operator friendly operation

DQUANT in the case of without user operation for automatic analysis of the data.If the user doesn't want to in the black box carries on the quantitative analysis mode, you can choose the simplified version of the user interface.It allows the operator to load calibration curve has been verified, and the batch analysis of unknown samples.

Analysis of unknown samples without modifying the calibration curve.Samples can be produced to a run of the entire series of the results of the analysis, the results in accordance with the layout of the display in the calibration program files.

Several optional form layout is used to report the results.

They contain different levels of information.Through the preview, can further customize the data, calculate export data to a spreadsheet program, to print or export documents to PDF and XPS formats.

Moreover, the results can also be transmitted to the database, the instrument to take advantage of DIFFRAC. Manager SUITE results for further analysis.

Automatic measurement, analysis and report

DQUANT make full use of the DIFFRAC. MEASUREMENT suite of functions to simplify the quantitative analysis.Measurement task will scan and analysis condition and the unknown sample, standard, or drift correction sample ID.

DQUANT results of data analysis and report can be carried out automatically, can also be performed manually by an operator.Just press a button, the whole process can be completed.

advantage

The advantage of DQUANT

Using a known reference material for accurate and precise calibration
There is no by micro system error caused by the absorption effect
Easy to use, almost no training to operators
By defining module and built-in formula, make analysis method has a high flexibility
Rapid (do not need to scan the full spectrum diagram, only a single diffraction peak)
Samples support high flux, automation, automatic sampler and automatic data analysis)
Combined with Ca XRF analyzer directly
Provide absolute concentration (from mu g to g) and relative concentration (wt %) a variety of forms such as the result

application

In analysis of the challenges you have?

Silicon dust monitoring

Microcrystalline silicon is typical of soil and rock composition, in the cast material or concrete also contains microcrystalline silicon.You must avoid contact with the harm to health in the workplace can be inhaled silica dust.In many countries has been issued by the competent department of exposure limits, which must be to monitor the concentration of silicon.DIFFRAC. DQUANT软件可用于建立符合规范的漂移校正校准曲线，以定量分析低至5 μg的未知样品，以及直接向实验室LIMS系统或内部仪器数据库报告结果。它完全支持NIOSH 7500所要求的吸收校正或分段校准。

Residual austenite

XRD and DIFFRAC DQUANT can be used to quantitative austenitic, austenite is a kind of related to the strength of the steel and other mechanical properties of the phase.Can use ratio method to calculate the content directly through the strength.ASTM E 975 or SAE SP - 453 precision agreement for not less than 0.5% of the results of standardized procedures.Analysis of multiple diffraction peak can further understand the texture of steel.

Aluminum production

Through the DIFFRAC. DQUANT combination by XRF Ca concentration data and typical mineral concentration data, the so-called "Potflux" method can be used to measure the metal components in a unit of furnace in the process of production.By analyzing the solidification mineral content in the electrolyte, can gain control of furnace unit operation, as well as the raw material and power consumption (occupy a large proportion in the production cost of aluminum) and other very important control parameter.And by XRD and DIFFRAC DQUANT can also monitor the anode quality.

Technical parameters

DIFFRAC. DQUANT specifications

version	The latest software version for DIFFRAC. DQUANT V1.6.
Analysis method	The calibration curve, the third order Add a method Chung 1 and 2 (reference intensity than) Ratio method Membrane filter method conforms to the NIOSH (7500) Analysis of XRD data and calcium XRF data at the same time
compliance	CGxP / 21 CFR Part 11
The operating system	Windows 8 (32-bit and 64 - bit) Windows 10 (64)

For more information

DIFFRAC. DQUANT resources

Application report, publicity color pages, product manuals, and the white paper

For more information

support

Let your DIFFRAC. DQUANT keep the latest version

Free maintenance updates

Through a free DIFFRAC. DQUANT maintenance updates, your DQUANT version can be updated to the latest version.No matter what your DQUANT permission level is, you can via www.brukersupport.com as a free download the latest maintenance update file.

Download the steps

In the "brooke customer support center (Bruker Customer Support) "registration
Click on the "software" button
Search for "DIFFRAC. DQUANT maintenance updates"
Download the update

The Service Call The Service Request Form

Bug fix

By making your DIFFRAC. DQUANT keep the latest version, no matter what permission level is, you have the right to use all the patches to the current version and to repair all previous releases.DIFFRAC. DQUANT maintenance updates are cumulative, thus it can be used for any previous versions.

What is the upgrade?

DIFFRAC. DQUANT maintenance update doesn't come with new features.If you want to use the function, introduced in the new version, you need to buy the latest DIFFRAC. DQUANT upgrade services.