G4 ICARUS Series 2
Clean, fast and efficient combustion: ZoneProtect ™
HighSense ™ : used to detect the SO ₂ efficient ultraviolet absorption method
Bright spot
Produced by combustion of carbon and sulfur - through unique innovation to redefine
Extensive research USES combined with the reliability of the proved by the industry
Induction furnace with high frequency (HF) and HighSense ™ detection technology of combustion analyzer G4 ICARUS Series 2, for fast and accurate analysis of the inorganic solid samples of carbon (C) sulfur content (S) set up the new post.
Because of the influence of carbon and sulfur on the properties of ceramic materials have, not only steel and iron the need for rapid and reliable analysis of carbon and sulfur, ferrous and non-ferrous metals and their alloys, ceramics, mineral, cement, limestone and many other inorganic solid also need to be fast and reliable analysis of the carbon and sulfur.
- ZoneProtect ™ : burning zone design patents used the suction nozzle, can ensure the samples with the best state to supply oxygen, and release of gas and dust particles can be instantly purging out of the nozzle.
- Unique with brushless dust removal function, automatic cleaning system, to ensure the efficient dust removal filter cleaning at the same time online and suction nozzle, and transfers the accumulation of dust into the crucible for disposal.
- HighSense ™ detection: relying on the latest innovations in the field of high-performance light-emitting diode (UV LED), successfully developed the excellent performance of SO ₂ detector: the technology of unique advantages including low detection limit and wide linear dynamic range.Brooke all the tester at work does not require any moving parts, and have integrated reference channel, can eliminate the drift effect, and achieve the highest SNR and calibration stability.
advantage
Combustion analysis why need?
When you need to quickly get the results, and must first guarantee the accuracy of the results, and sample preparation requirements at least, the combustion analysis method in the analysis of light elements has the irreplaceable status.Especially for the elements of matrix of integration in the very difficult, it is difficult to measure them directly by spectroscopy and even impossible.For example, because is the entire sample is analyzed with capacity method, G4 ICARUS Series 2 can analyze the carbon in the form of graphite clusters is not evenly distributed in grey cast iron, and can provide accurate analysis result.
application
Technical parameters
G4 ICARUS Series 2 technical parameters
| specifications | advantage | |||
The sample |
Inorganic matter, drying, any form or shape |
Highly flexible | ||
A typical sample |
Ferrous and non-ferrous metals and their alloys, ore, cement, limestone, glass, ceramics and soil | Different kinds of sample matrix | ||
| The sample container |
Porcelain crucible (standard form) | To use the industry standard consumables, cheaper, more reliable supply | ||
| The sample weight | 0.1-1 g (typical weight 0.5 g) | |||
| Combustion furnace | High frequency induction furnace, power adjustable, ZoneProtect ™ | More efficient, more rapid combustion, the highest productivity | ||
The detector
sulfur |
With a reference channel double range NDIR detector With a reference channel HighSense ™ NDUV squared detector |
Reliable, free maintenance, no drift Unique super wide detection range, incomparable signal-to-noise ratio, no drift |
||
| The carrier gas | Oxygen: 99.95% purity (when the detection of trace carbon must achieve 99.995% purity) Minimum pressure to 3.5 bar (50 psi) |
The standard gas purity can meet the requirements | ||
| The compressed air | Minimum pressure 5 bar (72.5 psi), no oil, no water, no particulate matter | |||
speed Analysis time |
40 normal time (s) |
At the same time quick analysis | ||
| A complete cycle time |
The < 1 min (typical) | High productivity and flux, waste disposal was transferred to the crucible | ||
| Noise emissions | The < 50 db | Enjoy the quiet | ||
| The calibration | Use solid standard for single point and multi-point standards | |||
| The reagent |
|
|||
| The power supply | 230 VAC (+ / - 10%);L1 N;50-60 Hz;16 A.2.7 kVA 208 VAC (+ / - 10%);L1 L2;50-60 Hz;16 A.2.7 kVA |
Industry standard power and current configuration | ||
| *) can provide based on NDIR detector when necessary |
webinar
For more information
G4 ICARUS resources
Laboratory report and poster
- G4 ICARUS Series 2: rapid determination of the carbon sulfur cement in a reliable way
- G4 ICARUS Series 2: rapid and reliable to determine the carbon and sulfur content in limestone, dolomite and elements
- G4 ICARUS Series 2: rapid determination of carbon in cast iron sulfur elements in a reliable way
- G4 ICARUS Series 2: rapid and reliable determination of concentration, including metal ore and the related materials of carbon sulfur elements
support
Service and support
We offer:
- Professional senior technical personnel to do fault professional technical support, isolation and solve the problem of hardware and software
- Network remote service, providing diagnosis and application support
- Fusion reality support - virtual engineers in your side,video)
- According to your request to schedule maintenance
- Customer site maintenance, maintenance services
- Spare parts delivery will be within one working day/the world needs a few working days to complete
- Installation qualification and operational qualification/performance verification of compliance services
- Site planning and relocation
- Find nextA training course
Check out ourSupport site:
- Software updates
- Product manuals and installation guide
- Training video
Need to register.
