S2 POLAR application field

Refinery - from ultra-low sulphur to crude oil

Refinery - from ultra-low sulphur to crude oil

Automobile fuel sulfur content by the strict limit.At present, many countries and regions in the world is limit sulfur content in 10 PPM, the rest are follow up.The specification requirements of ultra-low sulfur in diesel and gasoline (ULS) monitoring, not only the refinery, including pipeline, terminal stations and oil tank area downstream supply chain store and gas station is within the scope of the regulation.

S2 POLAR meet the international standards of the following:

  • ASTM D7220, D4294
  • ISO 13032, 20847, 8754
  • IP 336, 496, 532
  • JIS K2541-4

Sulfur to monitor, not just in the process of refining, also to monitor the other elements, such as nickel and vanadium (ASTM D8252) and iron, because they have on catalysts in the catalytic cracking (FCC) unit, chlorine is a big source of corrosion of pipes and pipe network (ASTM D4929).

S2 POLARWith functions of multielement analysis, an instrument is very suitable for refineries.

S2 POLAR refineries analyzer

specification benefits
Application field

Refinery element analysis, such as analysis of sulfur in the following products:

  • Gasoline, diesel,
  • biodiesel
  • Kerosene, jet fuel and heating oil
  • Naphtha, residual oil, crude oil
  • If there is demand, the analysis can also be other elements (e.g., P, Cl, Fe, Ni, V)

One instrument covering various refining analysis requirements
The standard method

ASTM D7220-17: cars, heating and the aviation fuel sulfur content, from 3 PPM to 942 PPM

ASTM D4294-16: the sulfur content of petroleum and petroleum products, from 16 PPM to 5%

Ready - to - Analyze * solution: applicable to ASTM D7220 and D4294, including blank samples, a set of standard sample, QC and DC samples

Meet ISO 13032, 20847, 8754, IP 336, 496, 532 and JIS standards such as K 2541-4.

Conform to the standards stipulated by the sulfur analysis methods, including ultra-low sulphur (ULS) application, international recognition.

Special pre-installed solutions to meet your requirements (option)

Detection limit
(LLD)
Measuring time of 300 s, the detection limit of 0.5 PPM Sulfur measurement precision, including ultra-low sulphur (ULS), each link to get refineries are enabled limited control
Measuring range From 3 parts per million (PPM) to 5%, only a calibration curve.For analysis of high content, curve automatically switches. A calibration curve, the realization of wide scope of content detection
note * option