Sample tube and sample processing
AquaX
AquaX is a closely the capillary porous design, interval, its main advantage lies in:
- Compared with the capillary and flat pool, a much higher sensitivity (19th hole AquaX version)
- High reproducibility, is the ideal choice for quantitative measurements
- Continuous flow measurement can be performed
- Easy to filling and flushing
- Compatible with all standard cavity, such as ER 4122 SHQ and ER 4103 tm
- Easy to install inside the cavity
- No special support
- Don't need to make additional adjustments AquaX pool
- Made of chemical resistance materials
- Provide standard accessories
ER 162 TC - Q group pool
- EPR sample pool for tissue samples
- Organization cavity size: 23 mm x 7 mm x 0.5 mm
- Overall size: 50 mm long, 2 mm thick, 10 mm wide
ER 164 EC - Q electrolytic cell
Used for cation and anion in the EPR measurement, including flat battery, packet, platinum electrode and calomel electrode.
The sample tube
High quality of the sample tube to obtain background of EPR spectrum is indispensable.Precision tubes with different diameter, to match the sample weight and the size of the resonator.
- ER 221 tub / 2, 3, 4 CFQ quality sample tube, the inner diameter of 2, 3 and 4 mm.
- ER 221 tub - Q10 Q band sample tube, the inner diameter of 1 mm.
- E 600 - ST9S W band sample tube, inner diameter of 0.5 mm.
ER 221 TPX
TPX capillary gas exchange experiments for aqueous solution, it is best to combine with ER 4123 d resonator using.This setting is best suited for sample amount is limited, because only need 3 (including l sample amount.
goniometer
Angle measuring is used in the study of EPR single crystal to provide a clear axis of rotation and rotation Angle.
Liquid automatic sampler
Many conventional application involves only a particular EPR signal intensity of simple measurement.However, these applications can also use a lot of sample set, high flux testing is required.ER the as - 4110 SET combined with automatic intensity measurement, can be SET for the use of liquid samples and application program of "high throughput" sample processing.Get the shelf life of beer to predict data is a very good application scenario.
ER 203 uv irradiation system
The ultraviolet irradiation system provided in the microwave cavity for the possibility of in situ irradiation given samples.Main purpose is to through light produce paramagnetic compounds.
The characteristics of ultraviolet irradiation system are as follows:
- Mercury lamp of 100 W
- 200-2000 - nm wavelength range
- Focusing on the unit
Flat pool equipment
Flat pool can be used in the x-band liquids with dielectric loss in the cavity.Used for room temperature measuring ER 160 FC - Q aqueous pool to and ER 4102 st, EMX and ELEXSYS standard cavity.
Through the ER 174 FCH flat pool bracket to realize the accurate positioning of flat pool.
ER 165 FCVT - Q aqueous sample pool and variable nitrogen temperature control instrument used in combination.
InsightEPR flow pool
As an alternative liquid sample flow pool allow sample injection (including manual and automatic sampling) into a set of continuous capillary.With a flow cell reaction monitoring can be a deeper understanding of the chemical and biological reactions.
- Is higher than glass capillary sensitivity
- Static or continuous flow
- Guaranteed consistency
LabScape
Brooke BioSpin nuclear magnetic resonance (NMR) and preclinical imaging products, services and lifecycle support
Brooke promises to provide clients with unparalleled throughout the buying cycle, from the initial consultation to the evaluation, installation, and service life of the instrument, it is LabScape always adhere to the service concept.
LabScape Maintenance agreement (Maintenance Agreements), the optional services (On - site On - Demand) and laboratory improvement plan (Enhance Your Lab) modern Lab is dedicated to provide you with a new method of Maintenance and service.