The elastic line

Dielectric ring vibration absorber ER 4118 x - MD5

ER the CW / 4118 X - MD5 is ELEXSYS E 580 FT - EPR x-band spectrometer general probe.It takes up to 5 mm O.D. of sample tube, under the bandwidth of 500 MHz produce 10 ns pulse PI / 2.Due to its high fill factor, even in the FT - large bandwidth needed for the EPR spectrum under low (Q), it provides high sensitivity.

Even under the high power operation, quickly and easily change of the sample is a standard feature of all temperatures.As a result, ease of use has been greatly improved.

Through the different coupling degree, vibration absorber Q factor can change continuously from very high to very low.This feature allows the vibration absorber bandwidth to match a specific tasks, namely the shortest died the minimum Q and the maximum bandwidth, or Q, to match the spin relaxation time to indicate that the maximum signal-to-noise signal or strict coupling for the CW - EPR.

(optional) optical window allows to irradiation of total active vibration absorber volume, so as to further enhance the versatility.In the range of 200 - nm to 5 microns, optical transparency is better than 90%.

Pulse - vibration ENDOR, EN 4118 x - MD4

The vibration absorber is 560 d - P DICE pulse ENDOR E part of the attachment.It in a very large frequency range to provide a constant nuclear spin flip Angle, greatly simplifies the ENDOR signal optimization, and promote the automation of multidimensional experiment.EPR properties and ER 4118 x - MD5 dielectric ring vibration absorber is superior.More...

Ring vibration absorber ER 4118 x - MS5 / l

Points of vibration ring vibration absorber specially designed for special experimental requirements.They generate the highest_B1,Provides maximum bandwidth, has the highest sensitivity for the smallest sample, with the highest time resolution and the lowest in death.Ideal:

• With the CW detection of saturation recovery EPR/ELDOR
• Optical rotation transient nutritional spectral excitement
• Coherent Raman beats ESEEM (CRB) detection signal
• DEER, DQC and ELDOR - NMR, up to 1000 MHz bandwidth
• Up to 100 MHz microwave field strength of nuts spectrum

Three x-band ring vibration absorber ER 4118 X - MS5 / l, maximum sampling traffic is 5 mm, 3 mm and 2 mm respectively.

Q band pulse EPR and vibration ENDOR, EN 5107 d2

The resonator with ELEXSYS SuperQ - FT system together, is 34 GHz pulse resonance EPR experiments provide the ideal tool.

L - and s-band split ring vibration absorber

The concept of high fill factor for low frequency EPR is more important.Therefore, Flexline design has been extended to the L band and S band.

ER 4118 L - MS5 l-band module, take the 5 mm sample

4118 S - ER MS5 s-band module, take the 5 mm sample